XRotor FPV G2 45A 4in1 ESC
Competition level FPV's most
powerful equipment
20X20mm ultra-small mounting hole spacing design, further reducing size and weight.
Combined with a new generation of 32-bit ARM F4 processor, the operating frequency
is further increased to 120MHz. Specially tailored for competition level FPV!
The operating frequency is further increased to:
120MHz
20X20mm
New high performance 32-bit
ARM F4 microprocessor
96KHz Dynamic PWM
Supports 48KHz-96KHz PWM frequency,
and can be dynamically adjusted adjusted
for precision throttle control
  • Support
    48KHz-96KHz
    PWM Frequency
Highly Integrated
With a similar size of a FC, the 4IN1 ESC includes 4 high performance 45A
ESCs, and a voltmeter which allows FC to monitor the amp & volt in real time.
Two ways for connecting the ESC to a FC: 1) connecting via soft cables, 2) soldering via solder
tabs are provided for selection. And the shock-absorbing design of mounting holes effectively
reduces the external vibration’s impact on high-sensitivity components and provides great
shock-absorbing protection to upper devices (i.e. FC). This ESC is designed for FPV racing.
Highly Integrated
  • 4 High
    Performance
    ESC

  • Soft wire
    insert
    Pad
    Soldering

  • Built in
    Meter

  • Shock-absorbing

Support variety
throttle modes

Supports the latest high-speed digital throttle signals, including DShot 300/600, providing excellent anti-interference performance and rapid response times. It also remains compatible with traditional PWM signals.

Support variety
throttle modes

Dshot 300/600
PWM

AM32 Firmware Ready
AM32 Firmware Ready
Equipped with the latest AM32 ESC firmware, delivering powerful performance,
built-in advanced features, and comprehensive functionality. Supports multiple
methods for configuring ESC parameters and firmware updates,
including throttle signal cable, development board,
and Betaflight-compatible flight controllers.
Thank you for your interest in HOBBYWING propulsion systems! For customized solutions,
please provide your contact information and technical requirements,
and we will get in touch with you within 24 hours.
captcha
By submitting this form, you agree to HOBBYWING's Privacy Policy
Thanks for reaching out!We have received your message and will get back to you shortly.
Best Regards,
HOBBYWING Team
Product NameXRotor FPV G2 45A 4in1 ESC
Product Number
  •  
  • 30902065
Specifications
  • Cont./Peak Current
  • Input Voltage
  • BEC output
  • 45Ax4/60Ax4
  • 3-6S LiPo
  • NO
Wires & Connectors
  • Input Wires</li
  • Output Wires
  • Input Connectors
  • Output Connectors
  • Red-14AWG-100mm*1
  • Black-14AWG-100mm*1
  • No wires but solder tabs
  • XT60(w/ Wires Soldered on)
  • No
Size & Weight
  • Size
  • Weight
  • 40x33x5mm
  • 12g
Features
  • Firmware
  • ESC Programming
  • Web Parameter Adjustment
  • DEO
  • Dshot300/600,PWM
  • Timing
  • Motor Rotation
  • Driving Frequency Setting
  • AM32 XROTOR45 F421
  • Supported
  • https://am32.ca
  • Supported
  • Supported
  • Supported
  • Supported
Applications
  • Applications
  • 100-300mm FPVs
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >

FAQ

XRotor FPV G2 45A 4in1 ESC
XRotor FPV G2
45A 4in1 ESC
FPV Brushless ESC
Competition level FPV
most powerful equipment
20X20mm mounting hole spacing.
With a new generation of 32-bit ARM F4 processor,
the operating frequency is further increased to
120MHz. Specially tailored for
competition level FPV!
The operating frequency
is further increased to:
120MHz
96KHz
Dynamic PWM
Supports 48KHz-96KHz PWM frequency,
and can be dynamically adjusted
adjusted for precision throttle control.
  • Support
    48KHz-96KHz
    PWM Frequency
Highly Integrated
With a similar size of a FC, the 4IN1 ESC includes 4 high
performance 45A ESCs,
a 5V BEC which can provide power for devices (i.e. FC),
and a voltmeter which allows FC to monitor the amp &
volt in real time. The two ways to connect the ESC
to a FC: 1) connecting via cables, 2) soldering via
solder tabs.The soft mounting of the ESC reduces
external vibration and impact on the highly
sensitive components and provides dampening to the
stacked components (i.e. FC). This ESC is
designed for FPV racing.
Highly Integrated
  • ● 4 High Performance ESC

  • ● Voltmeter

  • ● Soft Cables

  • ● 5V BEC

  • ● Shock-absorbing

Support variety
throttle modes

Supports the latest high-speed digital throttle signals, including DShot 300/600, providing excellent anti-interference performance and rapid response times. It also remains compatible with traditional PWM signals.

Support variety
throttle modes

Dshot 300/600
PWM

AM32
Firmware Ready
AM32 Firmware
Ready
Equipped with the latest AM32 ESC firmware, delivering powerful performance, built-in advanced features, and comprehensive functionality. Supports multiple methods for configuring ESC parameters and firmware updates, including throttle signal cable, development board, and Betaflight-compatible flight controllers.
Thank you for your interest in HOBBYWING propulsion systems! For customized solutions, please provide your contact information and technical requirements, and we will get in touch with you within 24 hours.
captcha
By submitting this form, you agree to HOBBYWING's Privacy Policy
Thanks for reaching out!We have received your message and will get back to you shortly.
Best Regards,
HOBBYWING Team
Product NameXRotor FPV G2 45A 4in1 ESC
Product Number
  •  
  • 30902065
Specifications
  • Cont./Peak Current
  • Input Voltage
  • BEC output
  • 45Ax4/60Ax4
  • 3-6S LiPo
  • NO
Wires & Connectors
  • Input Wires</li
  • Output Wires
  • Input Connectors
  • Output Connectors
  • Red-14AWG-100mm*1
  • Black-14AWG-100mm*1
  • No wires but solder tabs
  • XT60(w/ Wires Soldered on)
  • No
Size & Weight
  • Size
  • Weight
  • 40x33x5mm
  • 12g
Features
  • Firmware
  • ESC Programming
  • Web Parameter Adjustment
  • DEO
  • Dshot300/600,PWM
  • Timing
  • Motor Rotation
  • Driving Frequency Setting
  • AM32 XROTOR45 F421
  • Supported
  • https://am32.ca
  • Supported
  • Supported
  • Supported
  • Supported
Applications
  • Applications
  • 100-300mm FPVs
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >

FAQ