Elegantly designed for drift
The Xerun XD10 Pro ESC provides the ideal colors to perfectly match
your drift machines. They are available in black, red and purple.
designed for drift
Equipped with a powerful fan
The stylish aluminum fan is powerful and helps to massively cool down the ESC.
Moreover, the texture of the materials have been carefully selected to give you a great overall satisfaction.
Equipped with a powerful fan
Ultra-soft 13AWG silicone wire
The ultra-soft 13AWG silicone wire will be included in the
XD10 Pro ESC. They are ultra-flexible and low in resistance.
Maximum performance is guaranteed.
Reverse Polarity Protected
The Xerun XD10 Pro is reverse polarity protected. In an event when a user makes a mistake
by reversing the polarity, the ESC will not be broken.
Note: The standard capacitor included in the ESC will be damaged when the polarity is
reversed. By selecting the optional non-polarity capacitors (Item number: 30840004,
30840005), it will be able to prevent any sort of damages from happening.
IReverse Polarity Protected
protection circuitry frees you
from worrying about damage
caused by reverse installation.
Supports high-voltage BEC
The built-in BEC is able to support both high torque and high voltage
servos and can be adjustable at 5.0-7.4V (adjusted to 0.1V/step).
Supports high-voltage BEC
New communication protocol for quick
setup of parameters, firmware upgrades
The new communication protocol is used to set parameters and significantly
increase the speed of firmware upgrades, and the LCD G2 is twice as fast as
the OTA Programmer speed is 3-4 times faster.
Quick setup of
Programmable parameter optimized for drift
The 32-bit M4 processor is equipped with powerful software, features new
programmable parameters and it is optimized for drift applications. The new
parameters such as, initial start-up force adjustment, 48K ultra-high drive frequency,
and 24K ultra-high brake frequency ensures excellent drivability. It is tailored to extract
and maximize performance for high-end drifters.
Note! Use appropriate settings provided by the factory or team drivers. Check
operating temperature in order to maximize your electronics. The wrong settings
may damage the ESC/motor!
optimized for drift
Real-time data log makes it easy
to access operating status
After connecting the OTA module box, turn on real-time data
recording function to access the operating status.
Note: Bluetooth transmission distance is most effective within the 5m radius.
Real-time data log
makes it easy to
access operating status
Seamless connectivity with OTA
module box and mobile phone
Simple and convenient, parameter settings, firmware upgrading
and other operations can be established using Hobbywing’s OTA
Bluetooth module and your mobile phone via the Hobbywing app.
with OTA module box
and mobile phone
Wires & Connectors
ESC Programing via
Size & Weight
1)If the throttle control cable has been plugged in the improper channel on the receiver.
2)If the throttle control cable has been reversely plugged in the TH channel on the receiver.
3)The ESC firmware is lost; please return it to factory for after-sales service.
1)Check if the wire connections between the ESC and motor are A-a, B-b, and C-c.
2)Check if there is any poor connection/soldering between the ESC and motor.
3)The ESC/motor is damaged. Run some tests with a good ESC/motor to confirm the issue and then contact the dealer for after-sales service.
1)Check if the differential mechanism of chassis at the front or back is installed reversely.
2)The drive system of the car is not the same with mainstream. Set ESC parameter “Motor Rotation” to CW.
The Red LED flashes a single flash that repeats indicating the low-voltage cutoff protection is activated; please change the battery pack.
The Green LED flashes a single flash that repeats indicating the ESC thermal protection is activated; you need to cool the ESC down before using it again.
The Green LED flashes a double flash that repeats indicating the motor thermal protection is activated, you need to cool the motor down before using it again.
The Red & Green LEDs flash at the same time indicating the ESC has automatically switch the Sensor Mode to Sensorless Mode; please check if the sensor cable or motor has any problem.
1)Improper connection. A separate 3-pin port marked with "-/+/S" on the ESC is programming port. And you cannot connect your ESC to the LCD program box or WiFi module via the throttle control cable.
2)The firmware of the program box is not compatible with this ESC, please update the firmware.
3)The ESC is not compatible with this program box; it's only compatible with the multifunction LCD program box and the OTA Programmer.
1)The ESC triggers some protection. Please read the instruction to figure out which protection triggered as per the flashing mode of indicator.
2)The battery runs out. Replace battery.
3)Check whether the battery, motor wire and sensored wire is connected firmly.
4)ESC is damaged. Please contact the after service to maintain and repair.
The standard configured capacitor of ex-factory ESC is polar capacitor. Only the cappack will be damaged if the battery is connected reversely. Just replace the cappack will do.
Part Number: 30502001
Size: 91x51x17mm (LxWxH)
Platinum series of brushless aircraft ESCs, XeRun series &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs
Product Number: 30850400
Working Voltage: 5-12.6V
Supported Bluetooh Version: ≥ 4.0
Effective Range: 0-5m (Open Field)
Applications: work on the XERUN series, EZRUN series of car ESCs, and the Platinum series of aircraft ESCs, and SEAKING PRO series of boat ESCs.