![](/en/static/mobile/images/feilei.png)
![](/en/static/mobile/images/no.png)
![](/en/static/mobile/images/img21.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img21.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img21.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
![](/en/static/mobile/images/img13.png)
![](/en/static/mobile/images/img14.png)
Super-high Running Frequency
The STM32F405 MCU which features the powerful computing capability and super-high
running frequency allows the FC to run the PID and gyro with higher frequency.
Super-high Running
Frequency
XRotor Flight Controller F4
DShot 150/300/600/1200,
Oneshot125, Oneshot42,
Multishot Modes Supported
Besides the latest Dshot 150/300/600/1200 mode, the FC
also supports the regular PWM mode, Oneshot125 mode,
Oneshot42 mode and Multishot mode.
DShot 150/300/600/1200
Oneshot125, Oneshot42
Multishot Modes Supported
TF-card Insertion Supported
A TF-card can be inserted into the FC to record and save more flight data,
which allows users to adjust their aircraft easily.
TF-card Insertion
Supported
XRotor Flight Controller F4
Onboard OSD Microchip
Onboard OSD microchip allows users to
easily adjust various (OSD) parameters via
the Betaflight/Cleanflight software.
Onboard
OSD Microchip
BetaFlight/Cleanflight Firmware Ready
The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.
BetaFlight/Cleanflight
Firmware Ready
XRotor Flight Controller F4
Compatible(with the Hobbywing 4IN1 ESC&VTX)
It’s easy to wire and install when pairing the FC with a Hobbywing 4-in-1 tower ESC &
a HOBBYWING VTX (Video Transmitter).
Compatible
Product Name | |
Product Number | |
Size & Weight | Size Weight |
Features | Compatible with (Multirotors) Firmware FC Programming Programming via Compatible with (Modes) Compatible with (Transmitters) OSD Voltage Monitoring Current Monitoring External Buzzer LED Control TF-card USB Port |
Applications |
Product Name | Flight Controller F4 | |
Product Number | 31001000 | |
Size & Weight | Size Weight |
35*35mm 6g |
Features | Compatible with (Multirotors) Firmware FC Programming Programming via Compatible with (Modes) Compatible with (Transmitters) OSD Voltage Monitoring Current Monitoring External Buzzer LED Control TF-card USB Port |
Quadcopters, hexacopters OMNIBUSF4SD Supported Betaflight/Cleanflight-configurator PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL Built-in Supported Supported Supported Supported Supported (Maximum: 32g) MicroUSB |
Applications | 130mm & above FPVs |
Super hardware and running speed
Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity Flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.
Super hardware
and running speed
Super hardware and running speed
With DJI image transmission system port, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.
Special interface for DJI image transmission system
On-board 5V & 12V dual BEC circuit
FMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.
On-board 5V & 12V
dual BEC circuit
On-board Pit Switch module
FC integrated Pit Switch module can open or close VTx by radio after being adjusted on FC parameter software. Easy and convenient.
On-board Pit Switch module
Perfectly support firmware of various FPV
It support the firmware of BetaFlight , Cleanflight , Butterflight , inva and other mainstream FPV, and can use corresponding parameter adjustment software to adjust various parameters, making the FC more suitable for various FPV flight and race.
Perfectly support firmware
of various FPV
Unique installation design and shock absorption structure
The double hole distance mounting hole design (30 * 30MM & 20 * 20MM)can adapt to different frames. The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC ), and the shock absorption mechanism of installation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.
Unique installation design and
shock absorption structure
Perfectly match with Hobbywing ESC
Match with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.
Perfectly match with Hobbywing ESC
Product Name | Flight Controller F4 | |
Product Number | 31001000 | |
Size & Weight | Size Weight |
35*35mm 6g |
Features | Compatible with (Multirotors) Firmware FC Programming Programming via Compatible with (Modes) Compatible with (Transmitters) OSD Voltage Monitoring Current Monitoring External Buzzer LED Control TF-card USB Port |
Quadcopters, hexacopters OMNIBUSF4SD Supported Betaflight/Cleanflight-configurator PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL Built-in Supported Supported Supported Supported Supported (Maximum: 32g) MicroUSB |
Applications | 130mm & above FPVs |
Product Name | Flight Controller F4 | |
Product Number | 31001000 | |
Size & Weight | Size Weight |
35*35mm 6g |
Features | Compatible with (Multirotors) Firmware FC Programming Programming via Compatible with (Modes) Compatible with (Transmitters) OSD Voltage Monitoring Current Monitoring External Buzzer LED Control TF-card USB Port |
Quadcopters, hexacopters OMNIBUSF4SD Supported Betaflight/Cleanflight-configurator PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL Built-in Supported Supported Supported Supported Supported (Maximum: 32g) MicroUSB |
Applications | 130mm & above FPVs |