XRotor X11 Max
More thrust & prolonged battery life
  • 48-inch
    Carbon propellers

  • 48kg
    Maximum thrust

  • 7.8g/W
    20kg/rotor with a Thrust/ input-power

*The data was tested at sea level.
X11-MAX New Enhancement
20kg/rotor with a thrust efficiency of 7.8g/w, ease of achieving a longer battery life ,
and able to satisfy two spraying sorties (40L agricultural drones)
  • maximum thrust

  • carbon propellers

  • digital throttle signal

  • vector control

  • ingress protection

  • fault storage

  • good heat dissipation

  • multiple protection

  • data communication

  • upgradable

Better thrust system
48" Carbon Propellers, FOC vector control, bigger motor, a good choice for plant protection drones.
  • 48" Carbon Propellers

    High-performance carbon fiber foldable propellers, higher strength, lighter weight, higher paddle efficiency, and better balance to provide for an excellent match of heavy-duty plant protection drones.

  • FOC

    Precise and linear throttle control, efficiency increased by 10% (compared to the square wave control with the same power), and a reduction in the overall temperature by 10°C.

  • 44kg thrust

    20kg/rotor with a thrust effect of 7.8g/W, ease of achieving a longer battery life , and able to satisfy two spraying sorties (40L plant protection machine)

Dual throttle signal & CAN+PWM
PWM analog signal + CAN digital signal , precise throttle control, more
stable flight. Even in the state of single GPS without RTK, "fixed" flight.
Fault storage
Built-in fault storage function. Use the DATALINK data box to download and view,
and convert the fault into data, which helps the UAV to
quickly locate problems and analyze faults.
FOC
Precise and linear throttle control, efficiency increased by 10%
(compared to the square wave control with the same power),
and a reduction in the overall temperature by 10°C.
Super protection & no
fear of wind, sand
and rain
The ESC adopts a fully sealed flip-chip design. Some parts are IPX7 protected,
to effectively resist the corrosion of pesticides, dust, sand and other
foreign objects. It can be cleaned and replaced immediately with ease.
Multiple Protection Mechanisms
Throttle signal loss protection, over-current protection, stall protection,
voltage protection, etc., to ensure flight safety.
* Hobbywing CAN protocol has successfully communicated with some flight controller.
For the closed source flight controller, contact the manufacturer for instructions.
For the open source Ardupilot flight controller, refer
https://ardupilot.org/copter/docs/common-hobbywing-dronecan-esc.html
XRotor X11 Max CAD
Product Name
XRotor X11 MAX
Specifications
Max Thrust 44kg/rotor(70V, Sea Level)
Thrust/rotor 20-22kg/Axis (70V, Sea Level)
Recommended Battery 18S(LiPo)
Operating Temperature -20~50℃
Total Weight 2800g
Ingress Protection IPX6
Motor
KV Rating 60rpm/V
Stator Size 111*22mm
Powertrain Arm Tube Outer Diameter 50mm
Bearing Bearings imported from Japan
ESC
Recommended LiPo Battery 18S(LiPo)
PWM Input Signal Level 3.3V/5V
Throttle Signal Frequency 50-500Hz
Operating Pulse Width 1050-1950us(Fixed or cannot be Programmed)
Max. Input Voltage 78.3V
Max. Input Current (Short duration) 150A(With/ Good Heat Dissipation)
BEC No
Propeller
Diameter×Pitch 48*17.5
XRotor X11 Max Technical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

Speed(RPM)

Efficiency(g/W)

70V (18S LIPO)

HW 48*17.5 Inch Foldable Propeller

40%

10800

15.1

1044.7

1525

10.3

42%

11830

17.2

1192.7

1595

9.9

44%

12875

19.5

1350.0

1664

9.5

46%

13920

21.9

1514.0

1729

9.2

48%

14975

24.4

1686.0

1792

8.9

50%

16175

27.3

1861

1792

8.6

52%

17340

30.3

2093.0

1925

8.3

54%

18580

33.5

2317.8

1989

8.0

56%

19755

36.7

2537.8

2048

7.8

58%

20750

39.5

2729.4

2096

7.6

60%

21920

42.8

2961.2

2151

7.4

62%

23415

47.3

3267.7

2218

7.2

64%

25040

52.3

3614.9

2288

6.9

66%

25765

54.6

3774.7

2318

6.8

68%

26625

57.4

3968.5

2353

6.7

70%

28295

63.0

4358.6

2420

6.5

72%

29930

68.8

4759.7

2484

6.3

74%

31540

74.9

5174.9

2545

6.1

76%

32765

79.6

5505.2

2591

6.0

78%

33630

83.1

5746.7

2623

5.9

80%

34800

88.0

6084.4

2665

5.7

100%

44660

138.3

9552.2

2977

4.7

The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >

Software Download

FAQ

XRotor X11 Max

XRotor X11 Max CAD
Product Name
XRotor X11 MAX
Specifications
Max Thrust 44kg/rotor(70V, Sea Level)
Thrust/rotor 20-22kg/Axis (70V, Sea Level)
Recommended Battery 18S(LiPo)
Operating Temperature -20~50℃
Total Weight 2800g
Ingress Protection IPX6
Motor
KV Rating 60rpm/V
Stator Size 111*22mm
Powertrain Arm Tube Outer Diameter 50mm
Bearing Bearings imported from Japan
ESC
Recommended LiPo Battery 18S(LiPo)
PWM Input Signal Level 3.3V/5V
Throttle Signal Frequency 50-500Hz
Operating Pulse Width 1050-1950us(Fixed or cannot be Programmed)
Max. Input Voltage 78.3V
Max. Input Current (Short duration) 150A(With/ Good Heat Dissipation)
BEC No
Propeller
Diameter×Pitch 48*17.5
XRotor X11 Max Technical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

Speed(RPM)

Efficiency(g/W)

70V (18S LIPO)

HW 48*17.5 Inch Foldable Propeller

40%

10800

15.1

1044.7

1525

10.3

42%

11830

17.2

1192.7

1595

9.9

44%

12875

19.5

1350.0

1664

9.5

46%

13920

21.9

1514.0

1729

9.2

48%

14975

24.4

1686.0

1792

8.9

50%

16175

27.3

1861

1792

8.6

52%

17340

30.3

2093.0

1925

8.3

54%

18580

33.5

2317.8

1989

8.0

56%

19755

36.7

2537.8

2048

7.8

58%

20750

39.5

2729.4

2096

7.6

60%

21920

42.8

2961.2

2151

7.4

62%

23415

47.3

3267.7

2218

7.2

64%

25040

52.3

3614.9

2288

6.9

66%

25765

54.6

3774.7

2318

6.8

68%

26625

57.4

3968.5

2353

6.7

70%

28295

63.0

4358.6

2420

6.5

72%

29930

68.8

4759.7

2484

6.3

74%

31540

74.9

5174.9

2545

6.1

76%

32765

79.6

5505.2

2591

6.0

78%

33630

83.1

5746.7

2623

5.9

80%

34800

88.0

6084.4

2665

5.7

100%

44660

138.3

9552.2

2977

4.7

The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >

Software Download

FAQ