XRotor H120A 14S FOC V1

Excellent heat dissipation performance

Hardware: large-area heat-dissipating copper sheets and heat-conducting copper strips,
aluminum alloy case, efficient heat dissipation.
software: FOC is vector control, the drive efficiency increases by 10%, and reduces heat by up to 10°C.
Structurally: double-sided heat dissipation, scale-shaped heat dissipation fins for efficient heat dissipation.

High voltage ESC

60V is designed specifically for high voltage usage. It will heat up lesser compared
with low voltage ESCs of the same power.

Reliable operation regardless of seasonal changes

Ambient temperature -20~65°C for use, storage temperature -40~85°C,IP55 protection
grade (*IP67 and -40~65°C normal use temperature can be customized)

65°C
Hot Cold

-20°C
Hot Cold

FOC Intelligent drive is accurate and efficient

FOC ESC Comparing ESC with the same power, Intelligent drive vector control has higher
efficiency, lower temperature, faster response, lower noise, lower interference, linear throttle,
precise control, and kinetic energy recovery.

CAN Information and Communication

Fast data transmission and real-time acquisition of key information such as ESC status, speed, throttle,
current, voltage, MOSFET temperature, and capacitor temperature can be achieved using the black
box function. Data analysis is clear at a glance with the use of DATALINK box.

Intelligent protection, fault storage

Power-on self-test, undervoltage protection, overvoltage protection, overcurrent protection,
throttle signal loss protection, infinite restart, etc. According to the real-time working
conditions, the ESC intelligently protect the flight safety of the drone.
*The ESC has its own fault storage function for fault analysis.

Undervoltage
protection

Overvoltage
protection

Infinite
restart

Power-on
self-test

Fault
storage

Quick upgrade

The latest software from Hobbywing can be updated with the use of DATALINK box equipment.
*Support flight control remote upgrade (optional)

XRotor H120A 14S Foc V1 CAD
Product Name
XRotor H120A 14S Foc V1
Specifications
ESC XRotor Pro-H120A-14S-FOC-RTF-HW-H-V1
Input Voltage 12-14S(44-63V)
Continuous current 60A (Good heat dissipation)
Peak Current (3s) 120A(3S)
Operating Temperature -20℃~50℃
Magnetic encoder One motor, one program
Propeller positioning No
Waterproof Rating IP55(Custom IP67)
Weight 185.6g(Without wires)
Size 113*56*25.9mm
Communication protocol CAN(Custom Serial port)
Throttle signal isolated Isolated (Custom non-isolated)
PWM Input Signal Level 5V/3.3V
Throttle Signal Frequency 50-500Hz
Operating Pulse Width 1100us-1940us
Throttle travel calibration No
Specifications No
Double throttle signal Yes(CAN)
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >
Manuals
XRotor H120A 14S Foc V1 3D Model Drawing
XRotor H120A 14S Foc V1 Specification
JR cable(interface) definition
How to set ESC ID-8.16
Datalink CAN upgrade guide
Datalink UART upgrade guide
About motor beep sound& ESC LED blinking

Software Download

FAQ

DATALINKV2

DATALINKV2

DATALINKV2

Name: DATALINKV2
Telemetry: USB, CAN, Serial
Voltage: 6-81V
Size: 57*40*13mm(without wires)
Weight: 27g

+

Products Center

Service and Support

News Center

About

Global Partners

Welcome to Brushless
System Trends

Privacy Policy 粤ICP备14009225号-1  |  ©2015 Hobbywing Technology CO., LTD.. All rights reserved
XRotor H120A 14S FOC V1
Overview Specifications Support Accessories Detail Contact us Shop

Reliable operation regardless of seasonal

Ambient temperature -20~65°C for use, storage temperature -40~85°C,IP55 protection grade (*IP67 and -40~65°C normal use temperature can be customized)

Excellent heat dissipation performance

Hardware: large-area heat-dissipating copper sheets and heat-conducting copper strips, aluminum alloy case, efficient heat dissipation. software: FOC is vector control, the drive efficiency increases by 10%, and reduces heat by up to 10°C. Structurally: double-sided heat dissipation, scale-shaped heat dissipation fins for efficient heat dissipation.

FOC Intelligent drive is accurate and efficient

FOC ESC Comparing ESC with the same power, Intelligent drive vector control has higher efficiency, lower temperature, faster response, lower noise, lower interference, linear throttle, precise control, and kinetic energy recovery.

High voltage ESC

60V is designed specifically for high voltage usage. It will heat up lesser compared with low voltage ESCs of the same power.

CAN Information and Communication

Fast data transmission and real-time acquisition of key information such as ESC status, speed, throttle, current, voltage, MOSFET temperature, and capacitor temperature can be achieved using the black box function. Data analysis is clear at a glance with the use of DATALINK box.

Intelligent protection, fault storage

Power-on self-test, undervoltage protection, overvoltage protection, overcurrent protection, throttle signal loss protection, infinite restart, etc. According to the real-time working conditions, the ESC intelligently protect the flight safety of the drone. *The ESC has its own fault storage function for fault analysis.

Quick upgrade

The latest software from Hobbywing can be updated with the use of DATALINK box equipment. *Support flight control remote upgrade (optional)

XRotor H120A 14S Foc V1 CAD
Product Name
XRotor H120A 14S Foc V1
Specifications
ESC XRotor Pro-H120A-14S-FOC-RTF-HW-H-V1
Input Voltage 12-14S(44-63V)
Continuous current 60A (Good heat dissipation)
Peak Current (3s) 120A(3S)
Operating Temperature -20℃~50℃
Magnetic encoder One motor, one program
Propeller positioning No
Waterproof Rating IP55(Custom IP67)
Weight 185.6g(Without wires)
Size 113*56*25.9mm
Communication protocol CAN(Custom Serial port)
Throttle signal isolated Isolated (Custom non-isolated)
PWM Input Signal Level 5V/3.3V
Throttle Signal Frequency 50-500Hz
Operating Pulse Width 1100us-1940us
Throttle travel calibration No
Specifications No
Double throttle signal Yes(CAN)
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >
Manuals
XRotor H120A 14S Foc V1 3D Model Drawing
XRotor H120A 14S Foc V1 Specification
JR cable(interface) definition
How to set ESC ID-8.16
Datalink CAN upgrade guide
Datalink UART upgrade guide
About motor beep sound& ESC LED blinking

Software Download

FAQ

DATALINKV2
DATALINKV2

DATALINKV2

Name: DATALINKV2
Telemetry: USB, CAN, Serial
Voltage: 6-81V
Size: 57*40*13mm(without wires)
Weight: 27g