Excellent Design
The exterior design of V10 G2 is inspired by the wheel design of super sports car.
The gap between the motor rotor and motor housing is extremely small due to precision machining and
no copper sheet is needed avoids the motor failure caused by
the wear of the copper sheet.
Excellent Design
Linear & Smooth Control
The built-in Hall sensor adjustable end bell combined with a
high precision and balanced rotor guarantees the user a smooth
and linear power on demand.
Great Construction
The motor housing is made from hard anodized aluminum,
motor windings are wound from double insulated wire,
the advanced rotor structure is designed to handle high temperature from the use of rare
earth magnets and the imported bearings which are implemented are high precision
metal caged for a minimum to zero friction which in turn will guarantee strength,
outstanding performance, high durability and smoothness of the motor.
Great Construction
Adjustable Mechanical Timing
Adjustable mechanical timing, ranges from 20 degrees to 50 degrees and
30 degrees to 60 degrees for (3.5T-8.5T) non-Stock motors and (10.5T-25.5T) Stock
motors, for different applications.
Adjustable Mechanical Timing
ranges from 20 degrees
to 50 degrees for
(3.5T-8.5T)
non-Stock motors
ranges from 30 degrees
to 60 degrees for
(10.5T-25.5T)
Stock motors
High Efficiency
The output performance of this motor has an efficiency of up to 90%.
In the same load condition, V10 G2 motor has the higher efficiency but
lower temperature than V10 motor.
High Efficiency
High Efficiency
Re-buildable Case Design
The motor case is designed to be easy to dismantle for maintenance purposes
and for the replacement of common wearing parts (Ex bearings).
Re-buildable Case Design
IFMAR, ROAR, JMRCA Certified
This motor is in compliance with IFMAR, ROAR,
JMRCA specifications and approved by ROHS, CE, FCC, and etc.
Product Name | |
Product Number | |
Type | Scale Brushed/Brushless Sensored/Sensorless Pole Count |
Specifications | KV Rating LiPo Cells No-load Current(A) Max. Power Output(W) Amp at the Max. Power Output(A) |
Size & Weight | O.D.(mm) Length (mm) Shaft Diameter (mm) Weight (g) Front Bearing Rear Bearing |
Other Parameters | Timing Applications |
Product Name | XeRun V10 G2-3.5T | XeRun V10 G2-4.5T | XeRun V10 G2-5.5T | XeRun V10 G2-6.5T | XeRun V10 G2-7.5T | XeRun V10 G2-8.5T | XeRun V10 G2-10.5T | XeRun V10 G2-13.5T | XeRun V10 G2-17.5T | XeRun V10 G2-21.5T | XeRun V10 G2-25.5T | |
Product Number | 30401100 | 30101101 | 30101102 | 30101103 | 30101104 | 30101105 | 30101106 | 30101107 | 30401108 | 30101109 | 30401101 | |
Type | Scale Brushed/Brushless Sensored/Sensorless Pole Count |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
Specifications | KV Rating LiPo Cells No-load Current(A) Max. Power Output(W) Amp at the Max. Power Output(A) |
9550 2S 8.4 600 120 |
7600 2S 6.6 500 115 |
5800 2S 6.5 470 110 |
5000 2S 5.5 430 105 |
4550 2S 3.8 380 97 |
4050 2S 3.2 360 90 |
3800 2-3S 2.1 260 74 |
3000 2-3S 1.8 220 59 |
2300 2-3S 1.3 150 41 |
1900 2-3S 1.1 120 32 |
1500 2-3S 0.8 85 24 |
Size & Weight | O.D.(mm) Length (mm) Shaft Diameter (mm) Weight (g) Front Bearing Rear Bearing |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 181(6.385oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 181(6.385oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 172(6.067oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 170(5.997oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 172(6.067oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 173(6.102oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 170(5.997oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 166(5.855oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
Other Parameters | Timing Applications |
20-50 Degrees(Adjustable) 1/10th,1/12 th On-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10th,1/12 th On-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10thOn- road (Modify Class) Competitions; 1/10th 4WD Off-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10th 4WD Off-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10th Drift Car, 1/10th 2WD Off-road Competitions |
20-50 Degrees(Adjustable) 1/10th Drift Car, 1/10th 2WD Off-road Competitions |
20-50 Degrees(Adjustable) 1/10th Drift Car, 1/10th On-Road (STOCK Class) Competitions |
30-60 Degrees(Adjustable) 1/10th On-road (STOCK Class) Competitions |
30-60 Degrees(Adjustable) 1/10th On-road (STOCK Class) Competitions |
30-60 Degrees(Adjustable) 1/10th On-road (STOCK Class) Competitions, 1/10th Rock Crawlers. |
30-60 Degrees(Adjustable) 1/10th Stock;1/10th rock crawler |
Excellent Design
The exterior design of V10 G2 is inspired by the wheel design of super sports car. The gap between the motor rotor and motor housing is extremely small due to precision machining and no copper sheet is needed avoids the motor failure caused by the wear of the copper sheet.
Excellent Design
Linear & Smooth Control
The built-in Hall sensor adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand.
Great Construction
The motor housing is made from hard anodized aluminum, motor windings are wound from double insulated wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets and the imported bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn will guarantee strength, outstanding performance, high durability and smoothness of the motor.
Great Construction
Adjustable Mechanical Timing
Adjustable mechanical timing, ranges from 20 degrees to 50 degrees and 30 degrees to 60 degrees for (3.5T-8.5T) non-Stock motors and (10.5T-25.5T) Stock motors, for different applications.
Adjustable Mechanical Timing
High Efficiency
The output performance of this motor has an efficiency of up to 90%. In the same load condition, V10 G2 motor has the higher efficiency but lower temperature than V10 motor.
High Efficiency
Re-buildable Case Design
The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts (Ex bearings).
Re-buildable Case Design
IFMAR, ROAR, JMRCA Certifieds
This motor is in compliance with IFMAR, ROAR, JMRCA specifications and approved by ROHS, CE, FCC, and etc.
Product Name | XeRun V10 G2-3.5T | |
Product Number | 30401100 | |
Type | Scale Brushed/Brushless Sensored/Sensorless Pole Count |
1/10th BL SD 2 |
Specifications | KV Rating LiPo Cells No-load Current(A) Max. Power Output(W) Amp at the Max. Power Output(A) |
9550 2S 8.4 600 120 |
Size & Weight | O.D.(mm) Length (mm) Shaft Diameter (mm) Weight (g) Front Bearing Rear Bearing |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
Other Parameters | Timing Applications |
20-50 Degrees(Adjustable) 1/10th,1/12 th On-road (Modify Class) Competitions |
Product Name | XeRun V10 G2-3.5T | XeRun V10 G2-4.5T | XeRun V10 G2-5.5T | XeRun V10 G2-6.5T | XeRun V10 G2-7.5T | XeRun V10 G2-8.5T | XeRun V10 G2-10.5T | XeRun V10 G2-13.5T | XeRun V10 G2-17.5T | XeRun V10 G2-21.5T | XeRun V10 G2-25.5T | |
Product Number | 30401100 | 30101101 | 30101102 | 30101103 | 30101104 | 30101105 | 30101106 | 30101107 | 30401108 | 30101109 | 30401101 | |
Type | Scale Brushed/Brushless Sensored/Sensorless Pole Count |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
1/10th BL SD 2 |
Specifications | KV Rating LiPo Cells No-load Current(A) Max. Power Output(W) Amp at the Max. Power Output(A) |
9550 2S 8.4 600 120 |
7600 2S 6.6 500 115 |
5800 2S 6.5 470 110 |
5000 2S 5.5 430 105 |
4550 2S 3.8 380 97 |
4050 2S 3.2 360 90 |
3800 2-3S 2.1 260 74 |
3000 2-3S 1.8 220 59 |
2300 2-3S 1.3 150 41 |
1900 2-3S 1.1 120 32 |
1500 2-3S 0.8 85 24 |
Size & Weight | O.D.(mm) Length (mm) Shaft Diameter (mm) Weight (g) Front Bearing Rear Bearing |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 181(6.385oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 181(6.385oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 172(6.067oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 178(6.279oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 170(5.997oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 172(6.067oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 173(6.102oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 170(5.997oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
36.0(1.417in) 52.5(2.067in) 3.17(0.125in) 166(5.855oz) R2(D9.525*D3.175*t3.967) D9.525*D3.175*t3.967 |
Other Parameters | Timing Applications |
20-50 Degrees(Adjustable) 1/10th,1/12 th On-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10th,1/12 th On-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10thOn- road (Modify Class) Competitions; 1/10th 4WD Off-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10th 4WD Off-road (Modify Class) Competitions |
20-50 Degrees(Adjustable) 1/10th Drift Car, 1/10th 2WD Off-road Competitions |
20-50 Degrees(Adjustable) 1/10th Drift Car, 1/10th 2WD Off-road Competitions |
20-50 Degrees(Adjustable) 1/10th Drift Car, 1/10th On-Road (STOCK Class) Competitions |
30-60 Degrees(Adjustable) 1/10th On-road (STOCK Class) Competitions |
30-60 Degrees(Adjustable) 1/10th On-road (STOCK Class) Competitions |
30-60 Degrees(Adjustable) 1/10th On-road (STOCK Class) Competitions, 1/10th Rock Crawlers. |
30-60 Degrees(Adjustable) 1/10th Stock;1/10th rock crawler |