Home > Car Systems > XeRun Axe Brushless ESC V1.1
XeRun Axe Brushless ESC V1.1

FOC (Field-oriented
Control) for Super Linearity &
High Torque & Extreme Slience

New sensor technology has changed the feel,
performance, and overall tune-ability of the new Axe ESC and
Motor in ways some have never experienced. Field-oriented
Control is the name of this new tech, and is something all new to
the scale trail, rock racing, and rc world in-general. This new style of
sensor allows extremely accurate control and sensing of the motor
while maintaining extreme performance and reliability. The motor and ESC are
able to match the RPM of the motor to your throttle position under all driving conditions. This
greatly improves down hill driving giving this system the ability to drive down hill under complete control.FOC
technology also makes the whole system extremly silent, the motor doesn't create the annoying PWM noise when it is running.

FOC (Field-oriented Control)

Intelligent Torque Output & Speed
Closed-loop Control for Easy Control

Not just a new ESC and motor, the new FOC sensors, combined with Intelligent Torque
output and closed loop speed control mean the ESC and motor will maintain the
motor’s Torque level and RPM as the vehicles conditions change. Uphill, down hill,
under load, you name it, your Axe system will do what you’re telling it to do.

Intelligent Torque Output &
Speed Closed-loop Control
for Easy Control

Battery Reverse Polarity Protection

RCHobbywing's AXE FOC Crawler system has been designed with a
very unique feature protecting your ESC from damage caused by
Battery Reverse Polarity, so no matter how many times you reverse
the battery connections the AXE ESC and the paired motor are safe
from damage. Maybe this feature is the first in R/C Car industry.

Battery Reverse
Polarity Protection

ESC

BATT

Built-in battery-reversal
protection circuitry frees you
from worrying about damage
caused by reverse installation.

Applicable to All Weather & Track Conditions

Waterproof has been taken to a new level with the Axe System. Completely sealed ESC
design with robust heatsink case design ensure the ESC is ready for anything you throw
at it. The motor as well, is sealed, and combines a completely new sensor harness. No
messy extra steps to make your system water proof.
(Note: please dismantle and clean the motor and put some lubricant onto the bearings
after using it in some harsh conditions.)

Applicable to All Weather
& Track Conditions

High Driving Efficiency for Long Battery Life

Extremely efficient design comes from the combination of new methods. The FOC
sensors provided significant improvements to overall motor performance when
compared to standard brushless setups. Runtime is increased dramatically while
maintaining exceptional levels of power and response.

High Driving Efficiency
for Long Battery Life

Professional Drag Brake Adjustments &
Super Parking Capacity

Drag brake rate, and drag brake tuning allows scalers to adjust not only the
hill/hold/drag brake, but how quickly the brake applies. This allows high
speed driving with out sudden jerks or stops when releasing the throttle. The
drag brake itself is super charged, and able to be run at extremely high levels.
Compared to a standard crawling brushless setup, the drag brake in the Axe
System can be rated at %200 in comparison.

Professional Drag
Brake Adjustments &
Super Parking Capacity

Built-in Bluetooth for Connecting
the Mobile APP Directly

Built in Bluetooth connectivity means exactly that. The ESC has Blue Tooth built right in!
Nothing extra is needed to access the ESC’s complete on board programming but your smart
phone device and the Free Hobbywing App from your App Store. That’s right folks, the
Bluetooth feature is BUILT INTO the ESC. No extra devices, wires or connections required!

APPs will be available both IOS and Android.

Built-in Bluetooth Module
for Connecting the
Mobile APP Directly

Advanced and Secure Electronic Switch

The dust, dirt, and waterproof switch housing ensures a long reliable life for your
ESC, will not suffer from the problems most standard on/off switches encounter.

Advanced and Secure
Electronic Switch

Multiple Programmable Items

With enough settings to keep your vehicle running “just right”, there are also timing/boost settings, just in
case it’s not fast enough, this feature allows you to unleash some extra top speed from your Axe System.
Sometimes the trails are long and winding, so more wheel speed is welcome!

Multiple
Programmable Items

New firmware (01-00.2.01) for the XeRun AXE ESC
has improved the following features

• New Feature Added - RPM/Throttle
Matching - 3 Settings.

RPM/Throttle Matching, allows you to
adjust the way your system will react to
changes in load/terrain on trail. The
setting can be used to create a "brushed
motor" feel. If you like the way a brush
motor drives, use setting #1. Setting #2
(Default) is like the original ESC. Setting
#3, improves the consistency of the motor
RPM over different loads.

• New Setup Process - Automatic Motor Pairing
Improved these Issues: like loose rear endplate,
severe impact, or abnormal heat (during the
operation) abnormal power output occurs to
the motor. This process allows you to reset your
motor F.O.C. for the update and calibrates the
motor sensors to the firmware. See below for
complete details and the simple walk through.

• Motor "punch" or instant start up -
The motors response to instant throttle inputs, or
"clicking" to full throttle has been improved.

• Drag Brake -
Minor changes to how the drag brake operates to to
be more smooth and responsive.

• Motor Operation
Improved high rpm efficiency.

• More RPM
Overall, slight gains in RPM, and basic performance

• 550 Size Motor
Update includes additions for the new AXE 550 size
2700 and 3300 kv motors

Note:
1) Update the firmware version to 01-00.2.01, the AXE ESC must be connected AXE 540 motor.
2) You must do the “automatic motor pairing” when updated the ESC firmware,。

返回顶部