Excellent Product Design
● Super thin disc-type structure with a low center of gravity guarantees better control feel.
● Concave anti-skid teeth together with the lock-up screw at the bottom effectively prevent rotor
from moving or loosing and strengthens reliability of the motor.
● One-piece eight-bladed centrifugal fan greatly reduces the operating temperature of the motor.
● Super light weight, only 33.4g.
X-Rotor 2405 2250kv
X-Rotor 2405 2850kv
Eight-bladed Centrifugal Fan
Concave Anti-skid Teeth
Strong wind-cooling feature guarantees
the consistent output of high power.
Solid installation stands sudden acceleration,
deceleration and shock.
X-Rotor 2405 1800kv
Low Vibration & Precise Control
The precisely balanced rotor guarantees low vibration & noise during
high-speed rotation and more precise and reliable motor control.
Low Vibration &
Super Impact Resistance
High-strength CNC-machined aluminum alloy frame
which features the strengthened cross beam structure
combined with the high-precision hollow alloy steel
shaft going through the entire motor guarantee the
super impact resistance of the motor.
Top Quality Components
● Special 240℃ heat-resistant windings (after vacuum dip coating treatment) can stand high, surge current.
● N54 super magnets guarantee high torque output.
● Super thin (0.2mm) silicon sheets imported from Japan guarantee low
(power) loss, less heat generation but high magnetic permeability.
● Dedicated 4mm bearings (the thickness is enlarged by 33% comparing to
the regular 3mm bearings on the market) imported from Japan guarantee
great load-bearing capacity and impact-resistance.
Imported from Japan
Great Bearing Capacity &
Precise & Neat Windings
Precise & Neat
Low Resistance & High Efficiency
Great Electrical Characteristic
Hollow & High-strength
Alloy Steel Shaft going
through the entire motor
It can stand the impact of 200KG
Super Thin Silicon Sheets
imported from Japan
Less Heat Generation &
High Magnetic Permeability
N54 Super Magnets
High Torque Output
Thickened Output Wires
More Reliable Soldered Dots
Special 4mm Bearings
Imported from Japan
The maximum thrust of 1.58KG (*XRotor 2405 2850KV motors+5040
three-bladed propellers, 3S LiPo) combined with the thrust -to- weight
ratio of up to 47.3:1 provide aggressive power for FAV drone(s).
Test Conditions: XRotor 2405 2850KV motor(s) , 5040
three-bladed propeller(s), and the input voltage of 12V.
Product Number: 30405305/30405306
Input Voltage: 4S LiPo
Recommended ESC: Xrotor Micro 12A 4IN1 or above
Recommended Prop (inch): 3045 Three-bladed/Two-bladed Propellers |
3530 Three-bladed/Two-bladed Propellers
Product Number: 30405121,30405120,30405122